Maintenance and troubleshooting of electric heating reactor:

　　 1. The electric heating reactor should be operated and used strictly according to the working pressure and working temperature calibrated on the product nameplate to avoid danger.

　　2. The electric heating reactor shall strictly abide by the regulations on cooling and oil injection in the product manual, and do a good job in the maintenance and maintenance of the equipment.

　　3. When using all valves of the electric heating reactor, the valve stem (needle) should be slowly rotated to press the cover tightly to achieve the sealing effect. Do not use excessive force when closing, so as not to damage the sealing surface.

　　 4. The electrical control instrument of the electric heating reactor should be operated by a dedicated person, and overload protection facilities should be set up in accordance with the regulations.

　　Troubleshooting of the electric heating reactor:

　　 1. When there is leakage at the sealing surface, re-tighten the screw and re-grind and polish the sealing surface.

　　2. Repair and replace the valve stem (needle) and valve port when leakage occurs at the valve.

　　 3. The outer magnet rotates, but the inner magnet does not rotate. When the motor current decreases, notify the supplier and replace the inner magnet again.

　　4. If there is frictional noise in the magnetic coupling actuator, contact the supplier to replace the bearing and sleeve.